View unanswered posts | View active topics It is currently Wed Apr 24, 2019 1:23 am



Reply to topic  [ 5 posts ] 
 Mouse chewed wires, no headlights 
Author Message
Newb
Newb

Joined: Sun Dec 16, 2012 7:45 pm
Posts: 3
Post Mouse chewed wires, no headlights
2012 Zuma 125 starts and runs fine, but no headlights, low or high beam. Checked fuse, good. Good fresh battery. Pulled front cowl and found mouse nest and a few gnawed wires. One wire goes to headlight hi/low beam. Tail lights, brake lights, turn signals all work. Any ideas?


Sun Nov 25, 2018 6:54 pm
Profile
Scooter Addict

Joined: Fri Aug 31, 2018 5:18 pm
Posts: 185
Location: Fox Valley Wisconsin
scooters and mods: 2 2004 Vinos 2004 Zuma
Post Re: Mouse chewed wires, no headlights
Take a look at this it might help sort out the wiring
this is the link to the zuma50 dual headlight

Post YAMAHA ZUMA BUGEYE DUAL HEADLAMPS HOW TO: FREE MOD BY Jdubbs

just some wire and clips to fix it.
Forum members have also used this on the 125's

_________________
2004 Vinos Derestricted exhaust and variator stock carb with mikuni 75 main jet needle down 1 clip 40 mph
2004 Zuma Malossi sport 70 cc breaking in with stock pipe then Technigas next r polini 107 mm clutch polini green springs high speed variator 84 main jet 46 pilot jet needle 1 clip rich
2005 eton beamer airsal sport 70cc 9200 peak rpm top speed 40 77.5 mikuni jet needle 1 clip rich

BBKs all around on the way


Sun Nov 25, 2018 9:23 pm
Profile
Newb
Newb

Joined: Sun Dec 16, 2012 7:45 pm
Posts: 3
Post Re: Mouse chewed wires, no headlights
Found wire that's damaged. Will have to remove ignition switch to get at it. How do I remove the switch?


Mon Nov 26, 2018 2:34 pm
Profile
Scooter Addict

Joined: Fri Aug 31, 2018 5:18 pm
Posts: 185
Location: Fox Valley Wisconsin
scooters and mods: 2 2004 Vinos 2004 Zuma
Post Re: Mouse chewed wires, no headlights
Havent tackled that project
Jdubbya has the repair manuals on here .
just search repair manuals

These scooters are not that complex after you get the fairings off.
Just take your time lots of pictures and draw some diagrams on cardboard and place the screws in the right order so you can get it back together the first time .

_________________
2004 Vinos Derestricted exhaust and variator stock carb with mikuni 75 main jet needle down 1 clip 40 mph
2004 Zuma Malossi sport 70 cc breaking in with stock pipe then Technigas next r polini 107 mm clutch polini green springs high speed variator 84 main jet 46 pilot jet needle 1 clip rich
2005 eton beamer airsal sport 70cc 9200 peak rpm top speed 40 77.5 mikuni jet needle 1 clip rich

BBKs all around on the way


Mon Nov 26, 2018 7:15 pm
Profile
Newb
Newb

Joined: Sun Dec 16, 2012 7:45 pm
Posts: 3
Post Re: Mouse chewed wires, no headlights
Finally found the wire that had been destroyed. Pulled ignition and back part of fairing loose and managed to fish harness out enough to do a quick connect and splice a new wire section. Lights now work.


Mon Nov 26, 2018 8:11 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.