View unanswered posts | View active topics It is currently Sun May 20, 2018 8:29 am



Reply to topic  [ 2 posts ] 
 Need some help here! 
Author Message
Silver Member
Silver Member
User avatar

Joined: Thu Apr 19, 2007 3:04 pm
Posts: 760
Location: La Mirada So. Cali
Post Need some help here!
ok, so im about to start ordering all my parts for my crank mod for an 02 vino 2t. list of mods i have already, athena 70cc alumi. cylinder kit, 17.5 Dellorto carb, polini CF reeds, YTR Foam filter, Gianelli Silencer "SHOT" pipe, Malossi Torque spring (red), Malossi Delta clutch w/winged bell, polini variator 6roller. parts im about to order include, stage6 hpc 10mm crank, stage6 metal cage crank bearing, malossi delta race clutch springs (red). im collecting all tools required for this mod, and reseached about doing this mod (thanks hya for the awsome write up) so here are my questions
#1 im gonna order a s6 main jet kit to tune, not sure which one i should go with? any ideas!? i live in southern california about 200 feet above sea level.
#2 should i start to premix with this setup and at what ratio!?
..... my gianelli pipe allowed my previsous 70cc (s6 pro sport) kit to rev up to 12k or so, and destroyed my s6 kit and crank. thats why im upgrading my crank

:cheers:

_________________
c-kell wrote:
''The Thrilla Of The Villa""
2002 Yamaha Vino Classic S
Engine mods:
Motoforce Evo crank Stage 6 Streetrace kit Dellorto 17.5 man choke
Polini carbon fiber reeds. Gianelli shot exhaust
CVT mods:
Polini Variator. Hebo Driveface. Malossi Winged Clutch Bell. Stage 6 clutch springs
Suspension:
RDR Nitrogen Filled Shock (rear)
Frame:
Home fabricated 6" stretch 2" lower
ZF member #14


Wed Jul 08, 2009 6:34 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Mon Sep 22, 2008 10:45 pm
Posts: 4789
Location: Beautiful Denver Colorado
Post Re: Need some help here!
molefb wrote:
ok, so im about to start ordering all my parts for my crank mod for an 02 vino 2t. list of mods i have already, athena 70cc alumi. cylinder kit, 17.5 Dellorto carb, polini CF reeds, YTR Foam filter, Gianelli Silencer "SHOT" pipe, Malossi Torque spring (red), Malossi Delta clutch w/winged bell, polini variator 6roller. parts im about to order include, stage6 hpc 10mm crankThat crank is PIMPIN! Be carful not to scratch it up during your install., stage6 metal cage crank bearing Bad idea, you should get the SKF bearings from Athena. I'd have to check those ones to be sure they are ok. DO NOT FORGET TO REPLACE YOUR CRANK SEALS! or you will be doing it all over again., malossi delta race clutch springs (red). im collecting all tools required for this mod, and reseached about doing this mod (thanks hya for the awsome write upBoom Shaka Laka!) so here are my questions
#1 im gonna order a s6 main jet kit to tune, not sure which one i should go with? any ideas!Get the one that maxes out at 110 and has a minimum 85 jet.? i live in southern california about 200 feet above sea level.Lucky bastage! I would kill to live there.
#2 should i start to premix with this setup and at what ratio!? 25:1 Better just remove all that oil stuff while you are in there. Leave the teflon gear on and just pull the little sprocket off the oil pump and put the pump back where you found it.
..... my gianelli pipe allowed my previsous 70cc (s6 pro sport) kit to rev up to 12k or so, and destroyed my s6 kit and crankThat stinks!. thats why im upgrading my crank

:cheers:




Hyazuma

_________________
Current Configuration:
1. ATHENA HYPER RACE 70cc (Part Number: 081000-081000/1) (Yes it's fast)
1.1 Polini Sport 70cc P1660076 SOLD
2. Stage 6 Full Circle Racing Crank
3. NGK BR7HS
4. Malossi Over-Range Race Transmission 29.7grams (malossi rollers)
5. Malossi Yellow Torque Spring
6. Malossi Delta Clutch
7. Malossi Wing-Bell Clutch Bell
8. Malossi Sport Clutch Springs for Delta/Fly (Currently running white)
9. Malossi Up-Gears
10. Polini Airbox (This is the most pimpin part I have on my scoot!)
11. Pirelli SL26/Michelin Bopper combo
12. Hyazuma Special Throttle Cable (This one is B2TB!)
13. Arreche 19mm Carburetor
14. Arreche Manual Choke
15. Laser XPRO Expansion Chamber Exhaust (Low tone = Happy Nieghbors)
16. Nuova Ray High Performance Scooter Ignition (Prog. rev limiter and detune switch)

Touch my parts again and I'll cut you up into tiny pieces and make a salad!


Thu Jul 09, 2009 9:51 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.