View unanswered posts | View active topics It is currently Tue Dec 12, 2017 2:46 pm



Reply to topic  [ 6 posts ] 
 Removing ignition to get front panel off 
Author Message
Newb
Newb

Joined: Mon Sep 12, 2016 12:09 pm
Posts: 4
Post Removing ignition to get front panel off
I have a crack in the front panel - have the new panel, just can't figure out how to get the ignition cover off to remove the cracked front panel. I'm sure it's very simple, but I sure as heck can't figure it out. Any help would be appreciated!!


Mon Sep 12, 2016 12:13 pm
Profile
Scooterologist
User avatar

Joined: Sat May 31, 2014 9:12 pm
Posts: 41
Location: Englewood, Ohio
Post Re: Removing ignition to get front panel off
After you take the front cover off, there is a small bolt holding on the ignition cover. Take a look at this url and look at item 19.
http://www.bikebandit.com/oem-parts/201 ... #sch782317

In case this doesn't show for you it is under electrical/electrical 1

_________________
2 -2013 Zuma's,
Blue with TST Variator with 10/12 rollers, Koso clutch and race bell, Daytona belt, 13/39 up gears; Nikasil BBK with Forged piston and race cam; Simota air filter; HoBao Billet 3D multi level super heat sinks, Dual Headlight mod with LED 6k bulbs, Phongeer Quiet exhaust, Lowered Forks, Cut down Seat, Lowered Rear Shocks.
Matte Black with TST Variator with 10/12 rollers, Koso clutch and race bell, Daytona belt, 13/39 up gears; Nikasil BBK with Forged piston and Koso Roller race cam; 3.5mm Stroker Crank, High flow HER Race Head, RC Cold air intake, HoBao Billet 3D multi level super heat sinks, External oil blow-by catch can, Koso Oil cooler, Dual Headlight mod with 6k LED bulbs, Koso High torque starter, 30mm Koso TB and Intake, 10 hole 150cc SRP Injector, High output coil, Phongeer Medium Flow through exhaust, Innovate LC-2 AFR with DB Meter, Koso Mini-Temp Gauge, JBPro with custom map based on TB Map 2.


Mon Sep 12, 2016 2:29 pm
Profile
Newb
Newb

Joined: Mon Sep 12, 2016 12:09 pm
Posts: 4
Post Re: Removing ignition to get front panel off
Thanks! But on the 125, you have to take the ignition cover off first to be able to get the plastic underneath off and put the new plastic piece back on. So I need to now how to remove the ignition cover in order to get the plastic cover underneath off.


Fri Sep 16, 2016 5:40 am
Profile
Scooterologist
User avatar

Joined: Sat May 31, 2014 9:12 pm
Posts: 41
Location: Englewood, Ohio
Post Re: Removing ignition to get front panel off
When you take the front cover off (with Headlight) you will have access to the screw that holds the ignition cover on.

_________________
2 -2013 Zuma's,
Blue with TST Variator with 10/12 rollers, Koso clutch and race bell, Daytona belt, 13/39 up gears; Nikasil BBK with Forged piston and race cam; Simota air filter; HoBao Billet 3D multi level super heat sinks, Dual Headlight mod with LED 6k bulbs, Phongeer Quiet exhaust, Lowered Forks, Cut down Seat, Lowered Rear Shocks.
Matte Black with TST Variator with 10/12 rollers, Koso clutch and race bell, Daytona belt, 13/39 up gears; Nikasil BBK with Forged piston and Koso Roller race cam; 3.5mm Stroker Crank, High flow HER Race Head, RC Cold air intake, HoBao Billet 3D multi level super heat sinks, External oil blow-by catch can, Koso Oil cooler, Dual Headlight mod with 6k LED bulbs, Koso High torque starter, 30mm Koso TB and Intake, 10 hole 150cc SRP Injector, High output coil, Phongeer Medium Flow through exhaust, Innovate LC-2 AFR with DB Meter, Koso Mini-Temp Gauge, JBPro with custom map based on TB Map 2.


Fri Sep 16, 2016 7:55 am
Profile
Newb
Newb

Joined: Mon Sep 12, 2016 12:09 pm
Posts: 4
Post Re: Removing ignition to get front panel off
Got it done!! Thanks for the help!


Fri Sep 16, 2016 8:05 am
Profile
Newb
Newb

Joined: Fri Aug 25, 2017 12:19 am
Posts: 3
Post Re: Removing ignition to get front panel off
with TST Variator with 10/12 rollers, Koso grasp and race chime, Daytona belt, 13/39 up gears; Nikasil BBK with Forged cylinder and race cam; Simota air channel; HoBao Billet 3D multi level super warmth sinks, Buy Coursework Online Dual Headlight mod with LED 6k globules, Phongeer Quiet fumes, Lowered Forks, Cut down Seat, Lowered Rear Shocks.


Fri Aug 25, 2017 12:29 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.