View unanswered posts | View active topics It is currently Mon Dec 11, 2017 10:02 am

Forum rules


+++++++++++++++++++++++++++++++++++++++++++++++++Attention++++++++++++++++++++++++++++++++++++++++++++++++++++

Effective this week (8-12-11) The vendors area will be moving to a paid service to post vendor ad posts. This will be 30 dollars for a 6 month post, which breaks down to 5 dollars a month. This will include a Forum sponsor tag on your avatar, which will be required to make posts in the vendor section. Fees go towards hosting costs and keeping the forum the #1 source for Yamaha Zuma scooters.

Contact Jdubbya for details about getting a post in the vendor section.



Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3  Next
 I can powdercoat small parts cheap!!! 
Author Message
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
was able to do a shock spring
only difficult part is getting the spring off the shock

paint sticks really well, no sign of cracking when in use
then again the stock paint was powder coated to begin with, so should be fine

no prep to this, just wiped down and painted over existing paint

Image








added white on a cvt cover
Image

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Mon Jun 17, 2013 3:35 am
Profile WWW
Gold Member
Gold Member

Joined: Wed Jul 13, 2011 5:12 pm
Posts: 1211
Location: Bellflower, CA
Post Re: I can powdercoat small parts cheap!!!
ZUMIKE wrote:

added white on a cvt cover
Image


I saw this posted on TR......ME LIKEY!!!!!!!! :cheers:


Mon Jun 17, 2013 6:40 am
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
Image

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Sun Jun 23, 2013 1:43 pm
Profile WWW
Scooter Addict

Joined: Wed Jan 20, 2010 11:26 am
Posts: 167
Location: Dago, CA
Post Re: I can powdercoat small parts cheap!!!
How much to powder coat a pair of stock z125 fork sliders gloss black?

_________________
2009 YW125Y
164cc RC BBK - PG exhaust - TST variator - FRC race torque drive - NCY TD spring bearing - RRGS clutch bell - Koso clutch - 12T Majesty gears - BWS-X swing arm - Simota air filter - Koso tail light/turn signal - Embedded rear LED turn signals - Kitaco license plate relocator - Accel bars - JDM mirrors - RRGS brake levers - Yamaha logo fan cover - 35w HID Dual Headlights - Stebel horn - Continental Zippy tires - RPM Fork Kit - Stage6 R/T Rev Counter


Mon Jun 24, 2013 10:49 am
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
whats a fork slider?

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Mon Jun 24, 2013 11:01 am
Profile WWW
Scooter Addict

Joined: Wed Jan 20, 2010 11:26 am
Posts: 167
Location: Dago, CA
Post Re: I can powdercoat small parts cheap!!!
The part on the front forks (suspension) that slide up and down on the fork tube. The part the front brake caliper is bolted to and the front axle is bolted to. Stock it is a natural aluminum finish.

_________________
2009 YW125Y
164cc RC BBK - PG exhaust - TST variator - FRC race torque drive - NCY TD spring bearing - RRGS clutch bell - Koso clutch - 12T Majesty gears - BWS-X swing arm - Simota air filter - Koso tail light/turn signal - Embedded rear LED turn signals - Kitaco license plate relocator - Accel bars - JDM mirrors - RRGS brake levers - Yamaha logo fan cover - 35w HID Dual Headlights - Stebel horn - Continental Zippy tires - RPM Fork Kit - Stage6 R/T Rev Counter


Mon Jun 24, 2013 11:44 am
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
ok
that part is painted on the zuma, not a natrual finish

I can do it, if you gut it out
anything that melts at 400F needs to be removed
that means the seals, and the fluid

I dont want to be responsible if I mess up the seals trying to get them out or installing them

probably do both for $20 as long as everything is taken out

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Mon Jun 24, 2013 12:56 pm
Profile WWW
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
zuma 125 cvt cover
pretty close color to the frame
Image




made some small wheel stands for the oven
Image

elite wheel
Image

Image

Image


neon red
looks better in person
Image
Image
Image

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Sun Aug 25, 2013 6:40 pm
Profile WWW
Gold Member
Gold Member
User avatar

Joined: Mon Nov 24, 2008 9:54 pm
Posts: 5984
Location: Roswell , NM - yes that Roswell!
Post Re: I can powdercoat small parts cheap!!!
Wheel looks great. That is one tiny drum brake however!

_________________
08 zuma 50cc
T-mod.


Mon Aug 26, 2013 12:31 am
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
Some other scooter parts ive done recently

Image
Image
Image
Image
Image
Image
Image
Image

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Sun Feb 16, 2014 7:00 pm
Profile WWW
Bronze Member
Bronze Member

Joined: Fri May 25, 2012 11:27 pm
Posts: 463
Post Re: I can powdercoat small parts cheap!!!
How much to do a Stage 6 R1200 in a Ceramic black powder coat? Bottomline price please. A waterpump for Minarelli that is already Chromed, but some of the chrome came off and looks bad.

Also, CVT Cover that is vented and has a large hole at the Clutch/bell side.

_________________
2008 Yamaha FZ1 "Adder" 1000cc Sport Tourer with Power Commander V
2005 Yamaha Zuma "Longarm" Build thread here: viewtopic.php?f=3&t=20658&start=135
Stage 6 Racing modular 70cc Liquid cooled dual YZ125 radiators with two flow coolers
Stage 6 HPC 12MM
Stage 6 R1200 exhaust
Stock airbox snorkel out.
Malossi VL12 reed cage
MHR Over range
MHR Delta clutch w/ wing bell, Black springs, Red Malossi Contra.
Dellorto PHBG Black racing 21MM
Athena 14/42 Primaries 11:1 gearing
Stage six F1 Glossy Carbon fiber Mirrors
Integrated rear turn signals
dual headlight mod.
Cut and drilled CVT cover
Stage six Mk I Chrome kick starter.
Motul 800 Double ester ran at 25:1
2004 Yamaha Zuma "Clubber" Air Cooled bike, build thread here: viewtopic.php?f=3&t=24265&p=318426#p318426 Sold Feb 2nd 2014
Top Performances Trophy 70cc
Leo Vince ZX chrome
Athena 15/50 Gears
Malossi Multivar
84 MJ stock carb
Yellow Malossi clutch springs Yellow Malossi Torque spring
Stage Six F1 Mirrors
Stage Six MK II kick starter.
Motul 710
2004 Yamaha R1 "Punisher" sold May 2013 (sad face) stupid legal trouble
Two Brothers dual exhaust.
1987 Yamaha FZ700 stolen September 4th 2012 "Scorcher"
4-1 Vance and Hines full exhaust
K&N airfilter in stock airbox
Stage 2 Dyno jet kit.
1974 Yamaha RD250: Sold April 2nd 2011 "Arty"
TDR Hyper tension reeds
K&N air filter


Tue Feb 18, 2014 12:41 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
Go to all powder paints . Com
And send me the link to the exact color you want and we an go from there
As I don't have that in stock I don't want to get the wrong color

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Tue Feb 18, 2014 1:27 pm
Profile WWW
Bronze Member
Bronze Member

Joined: Fri May 25, 2012 11:27 pm
Posts: 463
Post Re: I can powdercoat small parts cheap!!!
This would work, and is the type correct? I selected High heat resistant paint.....but it's a two stroke exhaust which get VERY hot. http://www.shop.allpowderpaints.com/HIG ... L38559.htm

_________________
2008 Yamaha FZ1 "Adder" 1000cc Sport Tourer with Power Commander V
2005 Yamaha Zuma "Longarm" Build thread here: viewtopic.php?f=3&t=20658&start=135
Stage 6 Racing modular 70cc Liquid cooled dual YZ125 radiators with two flow coolers
Stage 6 HPC 12MM
Stage 6 R1200 exhaust
Stock airbox snorkel out.
Malossi VL12 reed cage
MHR Over range
MHR Delta clutch w/ wing bell, Black springs, Red Malossi Contra.
Dellorto PHBG Black racing 21MM
Athena 14/42 Primaries 11:1 gearing
Stage six F1 Glossy Carbon fiber Mirrors
Integrated rear turn signals
dual headlight mod.
Cut and drilled CVT cover
Stage six Mk I Chrome kick starter.
Motul 800 Double ester ran at 25:1
2004 Yamaha Zuma "Clubber" Air Cooled bike, build thread here: viewtopic.php?f=3&t=24265&p=318426#p318426 Sold Feb 2nd 2014
Top Performances Trophy 70cc
Leo Vince ZX chrome
Athena 15/50 Gears
Malossi Multivar
84 MJ stock carb
Yellow Malossi clutch springs Yellow Malossi Torque spring
Stage Six F1 Mirrors
Stage Six MK II kick starter.
Motul 710
2004 Yamaha R1 "Punisher" sold May 2013 (sad face) stupid legal trouble
Two Brothers dual exhaust.
1987 Yamaha FZ700 stolen September 4th 2012 "Scorcher"
4-1 Vance and Hines full exhaust
K&N airfilter in stock airbox
Stage 2 Dyno jet kit.
1974 Yamaha RD250: Sold April 2nd 2011 "Arty"
TDR Hyper tension reeds
K&N air filter


Tue Feb 18, 2014 2:18 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Fri Jun 25, 2010 6:56 am
Posts: 14287
Location: San Diego, CA
Post Re: I can powdercoat small parts cheap!!!
Well the exhaust really isn't a small part for me
So can't do that one

_________________
Image

2010 Zuma 155cc
BWS X Digital Gauges<>Clear Smoke BWS 125 Turn Signal Covers<>Billet Bar Ends<>Front Brake Rotor 260mm<>Razor Cam Covers<>NCY Breather Assembly<>Polini EVO Clutch Bell<>Anodized Orange Dipstick<>RRGS Front and Rear Shocks<>Dual 5000K HID's 35w High/Low Beam<>Black Adjustable Brake levers<>Halo Led's<>TST 2 Stage Variator 9gL 10gS <>NCY Oil Cooler<>Yamaha Skid Plate<>NCY Contra Spring Bearing<>1000 Rpm RRGS Contra Spring<>Yoshimura Exhaust<>NCY Direct Ignition Coil<>Lightweight Cooling Fan<>Koso Cable Clamps<>High Lift Cam+Lightened Cam Sprocket<>Underseat Storage Bag<>Stage 6 (Koso) Clutch<>Accel Handlebars<>Koso Brake Light<>Lightweight Swingarm<>RRGS 4 Pot Caliper (PH80)<>Stainless Braided Brake Line<>Lightened F|ywheel<>OEM Headlight Screens<>Zubiku Wing<>Air Horn<>9 inch stretch<>Koso High Flow Filter/Cover<>RPM 10 Spoke Wheels<>Digital Camo Vinyl Wrap<>SEP Cvt Covers





Image Image Image


Tue Feb 18, 2014 7:42 pm
Profile WWW
Bronze Member
Bronze Member

Joined: Fri May 25, 2012 11:27 pm
Posts: 463
Post Re: I can powdercoat small parts cheap!!!
Damn....The exhaust is what I need the most....

How much for a Rear rack for the Z50, and water pump.

_________________
2008 Yamaha FZ1 "Adder" 1000cc Sport Tourer with Power Commander V
2005 Yamaha Zuma "Longarm" Build thread here: viewtopic.php?f=3&t=20658&start=135
Stage 6 Racing modular 70cc Liquid cooled dual YZ125 radiators with two flow coolers
Stage 6 HPC 12MM
Stage 6 R1200 exhaust
Stock airbox snorkel out.
Malossi VL12 reed cage
MHR Over range
MHR Delta clutch w/ wing bell, Black springs, Red Malossi Contra.
Dellorto PHBG Black racing 21MM
Athena 14/42 Primaries 11:1 gearing
Stage six F1 Glossy Carbon fiber Mirrors
Integrated rear turn signals
dual headlight mod.
Cut and drilled CVT cover
Stage six Mk I Chrome kick starter.
Motul 800 Double ester ran at 25:1
2004 Yamaha Zuma "Clubber" Air Cooled bike, build thread here: viewtopic.php?f=3&t=24265&p=318426#p318426 Sold Feb 2nd 2014
Top Performances Trophy 70cc
Leo Vince ZX chrome
Athena 15/50 Gears
Malossi Multivar
84 MJ stock carb
Yellow Malossi clutch springs Yellow Malossi Torque spring
Stage Six F1 Mirrors
Stage Six MK II kick starter.
Motul 710
2004 Yamaha R1 "Punisher" sold May 2013 (sad face) stupid legal trouble
Two Brothers dual exhaust.
1987 Yamaha FZ700 stolen September 4th 2012 "Scorcher"
4-1 Vance and Hines full exhaust
K&N airfilter in stock airbox
Stage 2 Dyno jet kit.
1974 Yamaha RD250: Sold April 2nd 2011 "Arty"
TDR Hyper tension reeds
K&N air filter


Tue Feb 18, 2014 10:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 35 posts ]  Go to page Previous  1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.