View unanswered posts | View active topics It is currently Tue Aug 14, 2018 1:49 am



Reply to topic  [ 54 posts ]  Go to page Previous  1, 2, 3, 4
 Aerox 100 wheels 
Author Message
Gold Member
Gold Member
User avatar

Joined: Tue Jul 08, 2008 9:16 pm
Posts: 11362
Location: Los Angeles area
scooters and mods: 05 Z50 4200 miles, 70cc Polini, 84 jet, Leo Vince zx, Athena Variator, stock clutch w/LV yellow springs and Athena contr
Post Re: Aerox 100 wheels
Brain fart. I meant wheels. :)

_________________
'05 Zuma 50, Athena sport 70cc (12mm piston) with Polini head (.9 squish), B9ES spark plug; timing advanced about 2˚; Yasuni C16 exhaust, Buzzetti kick stand to make room for it (and Stage6 paddock stand after dropping the freaking bike because of the kick stand); stock airbox no snorkel, 5 x 1/2" holes; Stage6 21mm racing PHBG, 45/95/W7 1 lean/40 slide; Polini/Power One 12mm HPC crank; Athena 15/50 gears (also have 14/42s pressed into a gearbox cover, just switched back and like the 15/50s so far); 107mm Malossi Delta clutch, "racing" red springs/lighter "racing" counterweights ± 6800 RPM engagement, Stage6 Kupplungsglocke (bell - the light one); Malossi 6112811 Overrange kit, red contra and 28.2G rollers; VForce 3 reeds; Michelin Bopper tires; back to the stock shock; dual headlight wiring; C3 mirrors; Trailtech TTO tachometer and temp gauge.


Tue Mar 04, 2014 5:55 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Mon Jul 02, 2012 10:08 pm
Posts: 1123
scooters and mods: Tp 70cc,next r,vforce 3 reed block,s6 variator,stock carb 86 mj,vee rubber 119c tires,med contra,stiff clutch springs
Post Re: Aerox 100 wheels
I got ya. Aerox wheels are 13 inches vs zumas 10 inches. Also there's way more options for different brake set ups.

_________________
2010 Zuma
L/C S6 R/T 95, S6 R/T 44/90 crank, S6 95cc Big Bore Pipe,Trenched and Ported Cases, MVT DD19 Iggy, MXS Intake with KX 85 Reeds, Malossi Overrange , Keihin PWK 35mm carb, UNI air filter, Doppler 14/42, Dr.Pulley HIT Clutch ( 8000 rpm engagement ), Stage6 433 R/T clutch bell, Premix 32-1.

2001 Zuma (Pre-Bug)
MXS Race 70cc, 28mm PWK , S6 Big Valve, SR-1 Crank, S6 R1400 Pipe, Malossi Overrange


Tue Mar 04, 2014 6:14 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Tue Jul 08, 2008 9:16 pm
Posts: 11362
Location: Los Angeles area
scooters and mods: 05 Z50 4200 miles, 70cc Polini, 84 jet, Leo Vince zx, Athena Variator, stock clutch w/LV yellow springs and Athena contr
Post Re: Aerox 100 wheels
Okay, so they are also like upgears. That's what I thought. Thanks.

What do you have to do to make room?

_________________
'05 Zuma 50, Athena sport 70cc (12mm piston) with Polini head (.9 squish), B9ES spark plug; timing advanced about 2˚; Yasuni C16 exhaust, Buzzetti kick stand to make room for it (and Stage6 paddock stand after dropping the freaking bike because of the kick stand); stock airbox no snorkel, 5 x 1/2" holes; Stage6 21mm racing PHBG, 45/95/W7 1 lean/40 slide; Polini/Power One 12mm HPC crank; Athena 15/50 gears (also have 14/42s pressed into a gearbox cover, just switched back and like the 15/50s so far); 107mm Malossi Delta clutch, "racing" red springs/lighter "racing" counterweights ± 6800 RPM engagement, Stage6 Kupplungsglocke (bell - the light one); Malossi 6112811 Overrange kit, red contra and 28.2G rollers; VForce 3 reeds; Michelin Bopper tires; back to the stock shock; dual headlight wiring; C3 mirrors; Trailtech TTO tachometer and temp gauge.


Tue Mar 04, 2014 8:02 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Tue Jul 08, 2008 9:16 pm
Posts: 11362
Location: Los Angeles area
scooters and mods: 05 Z50 4200 miles, 70cc Polini, 84 jet, Leo Vince zx, Athena Variator, stock clutch w/LV yellow springs and Athena contr
Post Re: Aerox 100 wheels
Get rid of the centerstand for openers, right?

_________________
'05 Zuma 50, Athena sport 70cc (12mm piston) with Polini head (.9 squish), B9ES spark plug; timing advanced about 2˚; Yasuni C16 exhaust, Buzzetti kick stand to make room for it (and Stage6 paddock stand after dropping the freaking bike because of the kick stand); stock airbox no snorkel, 5 x 1/2" holes; Stage6 21mm racing PHBG, 45/95/W7 1 lean/40 slide; Polini/Power One 12mm HPC crank; Athena 15/50 gears (also have 14/42s pressed into a gearbox cover, just switched back and like the 15/50s so far); 107mm Malossi Delta clutch, "racing" red springs/lighter "racing" counterweights ± 6800 RPM engagement, Stage6 Kupplungsglocke (bell - the light one); Malossi 6112811 Overrange kit, red contra and 28.2G rollers; VForce 3 reeds; Michelin Bopper tires; back to the stock shock; dual headlight wiring; C3 mirrors; Trailtech TTO tachometer and temp gauge.


Tue Mar 04, 2014 8:05 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Mon Jul 02, 2012 10:08 pm
Posts: 1123
scooters and mods: Tp 70cc,next r,vforce 3 reed block,s6 variator,stock carb 86 mj,vee rubber 119c tires,med contra,stiff clutch springs
Post Re: Aerox 100 wheels
No there not bigger, the tires just have a smaller side wall. My rear tire is a little wider but has the same diameter as a stock sized zuma tire. The front is maybe 2% bigger in overall diameter then stock.

_________________
2010 Zuma
L/C S6 R/T 95, S6 R/T 44/90 crank, S6 95cc Big Bore Pipe,Trenched and Ported Cases, MVT DD19 Iggy, MXS Intake with KX 85 Reeds, Malossi Overrange , Keihin PWK 35mm carb, UNI air filter, Doppler 14/42, Dr.Pulley HIT Clutch ( 8000 rpm engagement ), Stage6 433 R/T clutch bell, Premix 32-1.

2001 Zuma (Pre-Bug)
MXS Race 70cc, 28mm PWK , S6 Big Valve, SR-1 Crank, S6 R1400 Pipe, Malossi Overrange


Tue Mar 04, 2014 9:26 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Tue Jul 08, 2008 9:16 pm
Posts: 11362
Location: Los Angeles area
scooters and mods: 05 Z50 4200 miles, 70cc Polini, 84 jet, Leo Vince zx, Athena Variator, stock clutch w/LV yellow springs and Athena contr
Post Re: Aerox 100 wheels
And now I remember asking this before and getting the same answer - for some weird reason.

Okay, thanks.

_________________
'05 Zuma 50, Athena sport 70cc (12mm piston) with Polini head (.9 squish), B9ES spark plug; timing advanced about 2˚; Yasuni C16 exhaust, Buzzetti kick stand to make room for it (and Stage6 paddock stand after dropping the freaking bike because of the kick stand); stock airbox no snorkel, 5 x 1/2" holes; Stage6 21mm racing PHBG, 45/95/W7 1 lean/40 slide; Polini/Power One 12mm HPC crank; Athena 15/50 gears (also have 14/42s pressed into a gearbox cover, just switched back and like the 15/50s so far); 107mm Malossi Delta clutch, "racing" red springs/lighter "racing" counterweights ± 6800 RPM engagement, Stage6 Kupplungsglocke (bell - the light one); Malossi 6112811 Overrange kit, red contra and 28.2G rollers; VForce 3 reeds; Michelin Bopper tires; back to the stock shock; dual headlight wiring; C3 mirrors; Trailtech TTO tachometer and temp gauge.


Tue Mar 04, 2014 10:33 pm
Profile
Gold Member
Gold Member
User avatar

Joined: Mon Jul 02, 2012 10:08 pm
Posts: 1123
scooters and mods: Tp 70cc,next r,vforce 3 reed block,s6 variator,stock carb 86 mj,vee rubber 119c tires,med contra,stiff clutch springs
Post Re: Aerox 100 wheels
Thought I'd do an update on this thread...

The wheels, brakes, forks and hub are all working great. The biggest improvement are definitely the tires. I had boppers before witch were a great upgrade from the OEM junk. But these Pirelli Evo's are on a different level! For any of you guys with aerox wheels and need new skins, get the Pirelli evo 21/22 tires you won't be disappointed.

_________________
2010 Zuma
L/C S6 R/T 95, S6 R/T 44/90 crank, S6 95cc Big Bore Pipe,Trenched and Ported Cases, MVT DD19 Iggy, MXS Intake with KX 85 Reeds, Malossi Overrange , Keihin PWK 35mm carb, UNI air filter, Doppler 14/42, Dr.Pulley HIT Clutch ( 8000 rpm engagement ), Stage6 433 R/T clutch bell, Premix 32-1.

2001 Zuma (Pre-Bug)
MXS Race 70cc, 28mm PWK , S6 Big Valve, SR-1 Crank, S6 R1400 Pipe, Malossi Overrange


Fri Apr 25, 2014 10:17 pm
Profile
Silver Member
Silver Member
User avatar

Joined: Sun Aug 03, 2008 4:57 pm
Posts: 934
Location: USA
scooters and mods: viewtopic.php?f=50&t=25587
Post Re: Aerox 100 wheels
I got a set shop might be selling

_________________
MY 2000 PREBUG PHOTOS -----> viewtopic.php?f=50&t=25587


Sun May 14, 2017 2:49 pm
Profile
Newb
Newb

Joined: Wed May 09, 2018 9:19 pm
Posts: 1
Post Re: Aerox 100 wheels
Sorry to revive an old thread but did you use an aerox spacer or cut down yours and if so what size did you end up using??....also did the smaller rotor(the one that didnt look right) line up properly? I am just doing this install and was not anticipating this rotor issue ..it looks like a 180mm flat rotor with 70mm bolt centers and 58mm hub center would fit without modification. I would also need ,I believe, M10 bolts instead of M8 for the rotor?


Wed May 09, 2018 9:40 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 54 posts ]  Go to page Previous  1, 2, 3, 4

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.